Based on a unique cutting technology Metso FineShredders process pre-shredded, sorted waste and are a vital tool for industries requiring consistent homogeneous waste streams.

METSO FINESHRED SERIES

We offer a complete line of products for this challenging application. Most lines start with a Metso Pre-shredder followed by a screening and separation process that includes the WESTERIA Wind sifter as well as other components. For the final fuel sizing we offer the Metso FineShred series. These single and twin shaft shredders have been developed specifically for the production of alternate fuel from waste:

The Metso FineShred units can be used in a wide range of different applications including difficult materials. Particle sizes of 10-100 mm are obtainable depending on the screen size applied.

FEATURES

Shaft
The patented shaft can be fitted with several different cutting tools. Knife blocks are positioned firmly in the shaft utilizing a unique self-centering, distortion- and tilting safe assembly. In the FineShred the shaft are positioned in a way that secures a correct feeding via the pusher. Along with the geometry of the 12-edged shaft, which minimizes the risk of materials winding up, this secures no heat development in the machine.

Knives
Knives are available in different designs depending on the demands from different applications. The positioning of the counter knives in relation to the rotating knives result in a “clean cut” minimizing dust emissions. Easy adjustment of the cutting clearance is secured by help of notches.

Screen
Due to the precise cutting of the material the strain on the screens is minimal and the design can therefore be made in very thin materials. Typically, the screens are manufactured from 6 mm thick steel plates. As there is no pressure on the screen the open area can be optimized and secure a high output rate.

Drive
The hydraulic system consists of a variable pump with power control, an integrated feed pump and a hydraulic motor mounted on each shaft. All together a “state of the art” doubles hydrostatic system, providing the maximum output and the most reliable performance available.

SINGLE SHAFT SHREDDERFEATURES

The Metso 1550 and 3550 is the ideal shredder for RDF/PEF and SRF from Waste these units allow enormous capacities from  that range from 3-20 Tons per hours depending on the utilized screen size. Easy access to the rotor in combination with the well known Metso feature make maintenance a breeze.

DUAL SHAFT SHREDDERFEATURES

The Metso 4500 and 6500 are the ideal HIGH CAPACITY shredders for RDF/PEF and SRF from Waste these units allow enormous capacities that range from 5-25 Tons per hours depending on the utilized screen size. Easy access to the rotor in combination with the well-known Metso features make maintenance a breeze.

BENEFITS

  • Homogeneous output
  • Horizontal pusher interlinked with shaft
  • Minimal fine particles
  • Minimal dust emissions
  • No heat generation
  • Easy maintenance