Used Recycling Equipment

Go Green with Used Machines.
Reuse, Recycle, Reimagine!

Check out the Used Equipment we have Available!

M&J 4000M-8 with Magnet

  • eFACTOR3 - Used Recycling Equipment - M&J 4000M-8 with Magnet
  • eFACTOR3 - Used Recycling Equipment - M&J 4000M-8 with Magnet
  • eFACTOR3 - Used Recycling Equipment - M&J 4000M-8 with Magnet
  • eFACTOR3 - Used Recycling Equipment - M&J 4000M-8 with Magnet
Technical Data for Power Pack METSO M&J 4000 M
Operating Hours < 500 Hours
Year 2013
Drive Power 530 hp (390 kW) Mercedes OM Diesel Engine
Drive System Double Hydrostatic
Type of Cutter M&J Cutting Table, 8 knife
Hopper Opening 157.5” x 90.5” (4,000 mm x 2,300 mm)
Hopper Configuration 3 sides straight, 1 side flared
Machine Opening 94.5” x 78.7” (2,400 x 2,000mm)
Hopper Volume 9.84 cubic yards (8 m³)
Number of Shafts 2 with asynchronous operation
Rotor “M&J” 2-shaft cutting Table
Rotor Knives 2 x 8 knives, 80mm, Hardox 500
Counter Knives 16 counter knives, Hardox 500
Cutting Table Opening 6” (150 mm)
Rotor Speed 55 RPM with HDC package
Total Machine weight App 77,000 lbs. (35,000 kg)
Discharge Conveyor 511.9” x 47.2” (13,000 mm x 1200 mm) with crossbelt magnet
Conveyor Speed 335 ft/min (1.7m/sec)
Discharge Height App 165.4” (4,200mm)
Includes Remote Control
Engine Mercedes Diesel

*This machine will be fully serviced before the final sale.

Ecostar Screen

eFACTOR3 - Used Recycling Equipment - Ecostar Screen

Approximately 4000 hours of operation

Technical Data ECOSTAR SCREEN
Model Screen 5000s150
Length 5000 (mm)
Width 1600 (mm)
Weight 6300 (kg)
Drive Unit 2×15 (hp)
Voltages Required 460V/3PH/60HZ/120V Single Phase

Westeria ChainCon® Conveyor

  • eFACTOR3 - Used Recycling Equipment - Westeria ChainCon® Conveyor
  • eFACTOR3 - Used Recycling Equipment - Westeria ChainCon® Conveyor
  • eFACTOR3 - Used Recycling Equipment - Westeria ChainCon® Conveyor

Refurbish conveyor with approx. 1,000 hrs with a new belt.

Overall System

Machine Designation ChainCon
Type KG1
Year of manufacture 2021
Sound of power level <80 dB(A)
Atmospheric humidity <70%
Ambient temperature -10° °C -40° °C
Conveyed goods PET bale
Bulk weight .2 t/m^3
Grain size 1600x1200x1000 mm
Capacity Max 7 piece
Capacity Max. 0,8 t/bale
Painting c3-M as per DIN EN ISO 12944 1-6
Surface Sand-blasted as per SA 2.5
RAL 9002

Design/geometry

Belt Width 2000 mm
Axle distance 22000 mm
Height of frame 650 mm
Incline 30°
Pos. drive right
Velocity 0,2 m/s
Distance carriers 750 mm
Total weight .2 t/m^3
Accessories 1600x1200x1000 mm

Electrical Specifications

Operating voltage 460 V
Frequency 60 Hz
Rated power 9,2 kW
Rated current max. 16,5 A
Motors IP degree of protection 55

M&J Pre-Shred 4000 (Mobile)

  • Unit 3191: M&J PreShred 4000 Mobile (8-knife) 3,600 hours
  • Unit 3193: M&J PreShred 4000 Mobile (8-knife) 1,340 hours
  • Unit 3205: M&J PreShred 4000 Mobile (8-knife) 6,000 hours – this unit is not available until January 2024
  • Unit 3211: M&J PreShred 4000 Mobile (10-knife) 293 hours
  • M&J 4000M Mobile Pre-Shredders - eFACTOR3
  • M&J 4000M Mobile Pre-Shredders - eFACTOR3
  • M&J 4000M Mobile Pre-Shredders - eFACTOR3
  • M&J 4000M Mobile Pre-Shredders - eFACTOR3
  • M&J 4000M Mobile Pre-Shredders - eFACTOR3
  • M&J 4000M Mobile Pre-Shredders Unit - eFACTOR3
  • M&J 4000M Mobile Pre-Shredders System

KREYENBORG IR Batch Infrared Dryer

Kreyenborg IR Batch Infrared Dryer

Discontinuous heating, crystallization, drying and coating of batches of different plastics and other bulk materials in minutes instead of hours.

Ideal solution for thermal treatment of single batches.

The machine operates in batch mode which means that an entire batch of material is loaded at once into the system. Once the processing time has elapsed the batch is discharged from the drum by reverting the rotational direction.

Application examples:

  • Drying and crystalizing of PET to 50 PPM
  • Drying and crystalizing of PLA
  • Drying and heating of PE pellets to remove volatiles
  • Crystallization of masterbatch in small batches
  • Get in touch with our industry professionals.

Advantages of Purchasing Preowned Machinery:

Cost savings

Cost savings

Used machinery is more affordable than new equipment, making it a budget-friendly option.

Immediate Availability

Immediate availability

Used machinery is readily available, allowing for quick acquisition and implementation, compared to made-to-order equipment.

Established Reliability

Established reliability

Previous use provides a track record to evaluate performance, reliability, and durability of the machinery.

Familiarity and Ease of Use

Familiarity and ease of use

Used machinery models are often well-known in the industry, reducing training requirements and facilitating integration into existing operations.

Reduced Depreciation

Reduced depreciation

By purchasing used machinery, you can avoid the steepest depreciation period and minimize the impact on asset value.

Delivering Turnkey Solutions

Sustainable choice

Opting for used machinery promotes environmental sustainability by extending the lifespan of resources.

Interested in our Used Recycling Equipment?

Get in touch with our Industry Professionals.